Altair > Case Studies > Sintavia's Innovative Approach to Aerospace Replacement Parts Using IoT

Sintavia's Innovative Approach to Aerospace Replacement Parts Using IoT

Technology Category

Sensors - Lidar & Lazer Scanners

Applicable Industries

Aerospace
Automotive

Applicable Functions

Maintenance
Quality Assurance

Use Cases

Additive Manufacturing
Experimentation Automation

Services

Testing & Certification

About The Customer

Sintavia is a global leader in independent metal additive manufacturing, supporting critical industries such as Aerospace & Defense, Oil & Natural Gas, Automotive, and Ground Power Generation. The company is committed to parameter optimization and quality serial production of metal parts that meet or exceed the exacting standards of these industries. Sintavia possesses unique in-house capabilities, including six high-speed printers from four of the largest global OEMs, a hot isostatic press, a vacuum heat treatment furnace, an industrial CT scanner, a wire EDM, a full complement of mechanical testing equipment, a full metallurgical laboratory, and a micro powder lab. This allows Sintavia to optimize parameters, serially manufacture, and audit quality much faster than any of its competitors.

The Challenge

Sintavia, a global leader in independent metal additive manufacturing, faced the challenge of proving the ability to additively manufacture optimized aerospace replacement parts. The goal was to exceed the existing part’s mechanical and operational properties while decreasing the overall weight. The company aimed to produce optimized designs of aerospace brackets that meet or exceed the existing bracket’s mechanical properties while reducing the overall weight of the parts. The component selected for this challenge was an aftermarket aviation part for a low pressure turbine, used 12 times on each engine.

The Solution

To address the challenge, Sintavia utilized a combination of concept generation with solidThinking Inspire and manufacturing with SLM 280 machine. The process began with capturing the geometry of the original part using a blue light scanner, followed by creating a high-fidelity CAD model to the exact specs of the original geometry. The team then determined all of the loading conditions that the part would incur during its usage and applied these to the model. Multiple optimization iterations were run on the part, including multiple rounds with modified design spaces, testing of different compression, factory of safety, etc. Finite element analysis (FEA) was then run on the results to compare and determine the best optimization iteration to move forward with. Once a final Inspire optimization result was selected, the team used the PolyNURBS tools inside of solidThinking Evolve to refine the optimization into its final geometry. The final optimized geometry was created using Sintavia's SLM Systems’ 280 twin laser machine, coupled with Inconel 718 powder.

Operational Impact

The operational results of Sintavia's solution were highly positive. The new, optimized part outperformed the original in all tests, including proof testing with a load of 5000lbs, fatigue testing, and metallurgy testing. The new part demonstrated a three times longer fatigue life and less porosity than the original, all while being approximately 15% lighter. This not only proves the effectiveness of additive manufacturing in producing superior aerospace parts but also opens up opportunities for further optimization and innovation in the field. Sintavia plans to further optimize this part and work on other parts that can be optimized for additive manufacturing, demonstrating a commitment to continuous improvement and innovation.

Quantitative Benefit