Technology Category
- Sensors - Environmental Sensors
- Sensors - Temperature Sensors
Applicable Industries
- Buildings
- Construction & Infrastructure
Applicable Functions
- Facility Management
- Product Research & Development
Use Cases
- Time Sensitive Networking
- Virtual Prototyping & Product Testing
About The Customer
The customers in this case are the residents of the small village of Magoda in Tanzania, a region highly prone to infectious diseases, particularly malaria. The residents were living in traditional houses that had poor ventilation, leading to high indoor temperatures and an uncomfortable living environment. This made it difficult for them to use mosquito nets, thus increasing their risk of contracting malaria. The residents needed a solution that would not only reduce their risk of malaria but also improve their overall living conditions. The Magoda Project aimed to provide this solution by designing and building prototype houses that focused on natural ventilation to decrease indoor temperature and make it more comfortable for residents to use mosquito nets.
The Challenge
The Magoda Project was born out of a meeting between a Danish architect and a German doctor, both passionate about combating malaria, a disease that is particularly prevalent in Africa. The World Health Organization reported that in 2015, over 200 million cases of malaria were responsible for more than 400,000 malaria-related deaths. The challenge was to develop malaria-free housing in a local community in Tanzania. Traditional housing in the region often resulted in poor indoor climates due to lack of ventilation, leading to high indoor temperatures. This made it unbearable for residents to use mosquito nets, thus increasing the risk of malaria transmission. The goal was to create a solution that would not only reduce the risk of malaria but also improve the overall living conditions of the residents.
The Solution
The solution was to design and build prototype houses that focused on natural ventilation as a means to decrease indoor temperature, making it more comfortable for residents to use mosquito nets and thus reducing the risk of malaria transmission. Ingvartsen Architects, led by Jakob Knudsen, employed students to survey traditional housing facilities in Africa, India, Thailand, and the Philippines. They used these surveys to create 3D models of the buildings, which were then used for temperature simulations. They also tested design changes and developed digital prototypes for new, malaria-free housing types. Seven different prototypes were built in the small village of Magoda, along with three refurbished existing houses for reference. After testing, they used their findings to build a final house, which was the culmination of their efforts.
Operational Impact
Quantitative Benefit
Case Study missing?
Start adding your own!
Register with your work email and create a new case study profile for your business.
Related Case Studies.
![](/files/casestudy/Energy-Saving---Power-Monitoring-System.png)
Case Study
Energy Saving & Power Monitoring System
Recently a university in Taiwan was experiencing dramatic power usage increases due to its growing number of campus buildings and students. Aiming to analyze their power consumption and increase their power efficiency across 52 buildings, the university wanted to build a power management system utilizing web-based hardware and software. With these goals in mind, they contacted Advantech to help them develop their system and provide them with the means to save energy in the years to come.
![](/files/casestudy/IoT-System-for-Tunnel-Construction.png)
Case Study
IoT System for Tunnel Construction
The Zenitaka Corporation ('Zenitaka') has two major business areas: its architectural business focuses on structures such as government buildings, office buildings, and commercial facilities, while its civil engineering business is targeted at structures such as tunnels, bridges and dams. Within these areas, there presented two issues that have always persisted in regard to the construction of mountain tunnels. These issues are 'improving safety" and "reducing energy consumption". Mountain tunnels construction requires a massive amount of electricity. This is because there are many kinds of electrical equipment being used day and night, including construction machinery, construction lighting, and ventilating fan. Despite this, the amount of power consumption is generally not tightly managed. In many cases, the exact amount of power consumption is only ascertained when the bill from the power company becomes available. Sometimes, corporations install demand-monitoring equipment to help curb the maximum power demanded. However, even in these cases, the devices only allow the total volume of power consumption to be ascertained, or they may issue warnings to prevent the contracted volume of power from being exceeded. In order to tackle the issue of reducing power consumption, it was first necessary to obtain an accurate breakdown of how much power was being used in each particular area. In other words, we needed to be able to visualize the amount of power being consumed. Safety, was also not being managed very rigorously. Even now, tunnel construction sites often use a 'name label' system for managing entry into the work site. Specifically, red labels with white reverse sides that bear the workers' names on both sides are displayed at the tunnel work site entrance. The workers themselves then flip the name label to the appropriate side when entering or exiting from the work site to indicate whether or not they are working inside the tunnel at any given time. If a worker forgets to flip his or her name label when entering or exiting from the tunnel, management cannot be performed effectively. In order to tackle the challenges mentioned above, Zenitaka decided to build a system that could improve the safety of tunnel construction as well as reduce the amount of power consumed. In other words, this new system would facilitate a clear picture of which workers were working in each location at the mountain tunnel construction site, as well as which processes were being carried out at those respective locations at any given time. The system would maintain the safety of all workers while also carefully controlling the electrical equipment to reduce unnecessary power consumption. Having decided on the concept, our next concern was whether there existed any kind of robust hardware that would not break down at the construction work site, that could move freely in response to changes in the working environment, and that could accurately detect workers and vehicles using radio frequency identification (RFID). Given that this system would involve many components that were new to Zenitaka, we decided to enlist the cooperation of E.I.Sol Co., Ltd. ('E.I.Sol') as our joint development partner, as they had provided us with a highly practical proposal.
![](/files/casestudy/Intelligent-Building-Automation-System-and-Energy-Saving-Solution.png)
Case Study
Intelligent Building Automation System and Energy Saving Solution
One of the most difficult problems facing the world is conserving energy in buildings. However, it is not easy to have a cost-effective solution to reduce energy usage in a building. One solution for saving energy is to implement an intelligent building automation system (BAS) which can be controlled according to its schedule. In Indonesia a large university with a five floor building and 22 classrooms wanted to save the amount of energy being used.
![](/files/casestudy/Powering-Smart-Home-Automation-solutions-with-IoT-for-Energy-conservation.png)
Case Study
Powering Smart Home Automation solutions with IoT for Energy conservation
Many industry leaders that offer Smart Energy Management products & solutions face challenges including:How to build a scalable platform that can automatically scale-up to on-board ‘n’ number of Smart home devicesData security, solution availability, and reliability are the other critical factors to deal withHow to create a robust common IoT platform that handles any kind of smart devicesHow to enable data management capabilities that would help in intelligent decision-making
![](/files/casestudy/Splunk-Partnership-Ties-Together-Big-Data---IoT-Services.png)
Case Study
Splunk Partnership Ties Together Big Data & IoT Services
Splunk was faced with the need to meet emerging customer demands for interfacing IoT projects to its suite of services. The company required an IoT partner that would be able to easily and quickly integrate with its Splunk Enterprise platform, rather than allocating development resources and time to building out an IoT interface and application platform.