Milesight > Case Studies > Milesight 4,400 Sensors Energize 62 Energy Efficient and Comfortable Buildings

Milesight 4,400 Sensors Energize 62 Energy Efficient and Comfortable Buildings

Milesight Logo
Technology Category
  • Sensors - Environmental Sensors
Applicable Industries
  • Buildings
Applicable Functions
  • Facility Management
Services
  • System Integration
The Customer
About The Customer

Milesight's partner, Peak Power is a Canadian cleantech company at the forefront of the energy transition. They are pushing the envelope of what distributed energy resources can do in the built environment. They were one of the first companies to aggregate battery storage, grid interactive buildings, and bi-directional electric vehicles with a single decarbonization platform for partners to achieve net zero goals, cut operating expenses, and unlock new revenue opportunities.

The Challenge

In commercial buildings, temperature, humidity, and air quality are all important for people's health and productivity. High levels of CO2 inside commercial buildings can cause many health concerns, commonly known as SBS (Sick Building Syndrome). Increasingly sophisticated smart buildings are being developed by nations around the world to improve efficiency, reduce costs, and generally make the environment healthy for residents and business owners. Additionally, under the looming climate crisis, energy prices began soaring last year. The need for building energy usage optimization has never been this urgent.

The AI-driven system requires accurate and real-time environmental data for analysts to provide alerts and recommendations to the building operators when sensors show that pre-determined thresholds have been exceeded, or to optimize the building's operation to save money. The existing sensor system functioned poorly with critical problems:

Poor Signal

The original solution was based on a techonology with limited signal coverage, up to 60% of sensors onsite were down at any moment.

Excess Maintenance

The original solution was based on a techonology with limited signal coverage, up to 60% of sensors onsite were down at any moment.

Extra Expense

Each Temperature and CO2 sensor required a sim card that generated an extra $500 monthly for each floor.

The Solution

Milesight sensors are installed on each floor to monitor building data, including indoor ambience temperature, humidity, carbon dioxide concentration, occupancy, etc.

Milesight UG67 LoRaWAN® gateways are installed approximately every 3-stories with PoE power input to provide wide signal coverage. With embedded network server and 4G module, UG67 LoRaWAN® gateway can forward data collected by the sensor by MQTT to Peak Power's platform—Peak Insight via cellular network.

Operational Impact
  • Data-Driven Analyses

    With qualified data, the AI-powered platform can forecast the peak hours of energy usage and deliver data-driven recommendations to reduce lighting or HVAC usage. The platform will also send alerts when indoor temperature leaves the range of 21°C-26°C, or humidity falls below 40%, which makes occupants more vulnerable to viral respiratory infection, or when CO2 levels exceed 800 ppm which aggravates SBS.

  • Accurate Insights

    AM319, AM107, EM300-TH and EM500-CO2 collect indoor air quality parameters including temperature, humidity, and CO2. VS121 monitors the occupancy of the space. This data is forwarded to gateways in real-time. Building operators are able to gain actionable insights on indoor air quality.

  • Remote and Automated Management

    Building operators can remotely turn on/off the devices through WS523 Smart Portable Sockets based on the recommendations, thus optimizing and reducing energy consumption. Also, when receiving IAQ alerts, operators can control the HVAC system remotely to provide improve ventilation.

Quantitative Benefit
  • Energy-efficient and Eco-friendly Building

    The solution is composed of three key elements which are accurate and actionable insights on energy usage and IAQ, data-driven analyses, and remote management, This has greatly improved the energy efficiency of buildings and saved hundreds of thousands of Canadian dollars every year.

    Building operators can remotely turn on/off the devices through WS523 Smart Portable Sockets based on the recommendations, thus optimizing and reducing energy consumption. Also, when receiving IAQ alerts, operators can control the HVAC system remotely to provide improve ventilation.

Case Study missing?

Start adding your own!

Register with your work email and create a new case study profile for your business.

Add New Record

Related Case Studies.

Contact us

Let's talk!
* Required
* Required
* Required
* Invalid email address
By submitting this form, you agree that IoT ONE may contact you with insights and marketing messaging.
No thanks, I don't want to receive any marketing emails from IoT ONE.
Submit

Thank you for your message!
We will contact you soon.